HP LaserJet Enterprise 700 - Configure required fax settings; Fax Setup Wizard

Congure required fax settings
You must congure certain settings before you can use the fax feature. If these settings are not congured,
the fax icon is unavailable. These settings include:
●
Country/region
●
Date/Time
●
Company Name
●
Fax Number
●
Dialing Prex (optional)
This information is used in the fax header, which is for printing on all outgoing faxes.
NOTE: When rst installed, the fax accessory might read some of these settings from the product;
therefore, a value might already be set. Check the values to verify that they are correct.
NOTE: In the U.S. and many other countries/regions, setting the date, time, country/region, phone number,
and company name is a legal requirement for fax.
Fax Setup Wizard
The Fax Setup Wizard guides you through a step-by-step procedure to congure fax settings that are required
to use the fax feature. If the settings are not congured, the fax feature is disabled.
The rst time the product is turned on with a fax accessory installed, access the Fax Setup Wizard by following
these steps:
1. From the Home screen on the product control panel, touch the Initial Setup button.
2. Touch the Fax Setup Wizard menu.
3. Follow the steps in the Fax Setup Wizard to congure the required settings.
4. When the Fax Setup Wizard nishes, the option to hide the Initial Setup button appears on the Home
screen.
Access the Fax Setup Wizard after initial setup through the control panel by following these steps:
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Fax Setup Wizard
3. Follow the steps in the Fax Setup Wizard to congure the required settings. Fax setup is complete.
NOTE: The settings congured using the Fax Setup Wizard on the control panel override any settings made
in the HP Embedded Web Server.
176 Chapter 8 Fax ENWW