HP LaserJet Enterprise 700 - Standard output bin; Stapler;stacker (z and z+ models only)

Standard output bin
The standard output bin holds up to 500 sheets of 75 g/m
2
(20 lb) paper.
Stapler/stacker (z and z+ models only)
The stapler/stacker can staple jobs of up to 30 sheets of 75 g/m
2
(20 lb) paper. It can stack up to 500 sheets of
paper. The s
tapler can staple these sizes:
●
A3 (portrait orientation)
●
A4
●
B4 (portrait orientation)
●
B5 (landscape orientation)
●
Ledger (portrait orientation)
●
Legal (portrait orientation)
●
Letter
Paper weight can range from 60 to 120 g/m
2
(16 to 32 lb). Heavier paper might have a stapling limit of fewer
th
an 30 sheets.
If the job c
onsis
ts of only one sheet, or if it consists of more than 30 sheets, the product delivers the job to
the bin, but the product does not staple the job.
The stapler supports paper only. Do not try to staple other types of paper, such as envelopes, transparencies,
or labels.
To congure the default location where the product places the staples on the pages, follow this procedure:
1
. F
rom the Home screen on the product control panel, scroll to and touch the
Administration button.
2
. Open the f
ol
lowing menus:
●
Stapler Stacker Settings
●
Stapling
3
. Sel
ect a staple location from the list of options, and then touch the Save button. The following options
ar
e available:
●
None
●
Top left or right
NOTE: For documents with portrait orientation, the staple is in the upper-left corner. For
documen
ts with l
andscape orien
tation, the staple is in the upper-right corner.
●
Top left
●
Top right
ENWW Standard output bin 51