1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the More Options button, and then touch the Optimize Text/Picture button.
3. Select one of the predened options, or touch the Manually adjust button and then adjust the slider in
the Optimize For area. Touch the OK button.
4. Touch the Start button.
NOTE: These settings are temporary. After you have nished the job, the product returns to the default
settings.
Edge-to-edge copying
Use this feature to avoid shadows that can appear along the edges of copies when the original document is
printed cl
ose to the edges.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Copy Settings
●
Edge-To-Edge
3. Select the
Edge-To-Edge output option if the original document is printed close to the paper edges.
4. Touch the
OK button.
Clean the pickup rollers and separation pad in the document feeder
1. Lift the document-feeder latch.
ENWW Improve copy quality 263
To Next Page
Loading...
