HP LaserJet Enterprise 700 - Configure default options for fax receive jobs

Congure default options for fax receive jobs
NOTE: Default job option settings are shared across all fax methods; analog, LAN, and internet fax.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
Congure any of the following settings:
Menu item Description
Notication The Notication setting controls when the fax call report is printed for incoming faxes.
Stamp Received Faxes The Stamp Received Faxes setting enables or disables stamping incoming faxes. The
stamp prints the date, time, phone number, and page number on each incoming page.
Fit to Page When selecting a page size to print a fax, the product determines the closest page size
that matches the intended size from sizes available in the product. If the t-to-page
setting is enabled and the received image is larger than that page size, the product
attempts to scale the image to t the page. If this setting is disabled, an incoming image
larger than the page splits across pages.
Paper Selection Use the Paper Selection feature to specify which tray to use for printing faxes.
Sides Use the Sides feature to specify 1–sided or 2–sided ouput for faxes.
ENWW Congure default options for fax receive jobs 185