HP LaserJet Enterprise 700 - 500-sheet trays; Tray capacity and paper orientation

500-sheet trays
Tray capacity and paper orientation
To prevent jams, do not overll trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-6 500-sheet tray capacity
Paper type Specications Quantity
Paper Range:
60 g/m
2
(16 lb) bond to 220 g/m
2
(59 lb) bond
Equivalent to 500 sheets of 75 g/m
2
(20 lb) bond
Maximum stack height: 53 mm (2.1 in)
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 53 mm (2.1 in)
Glossy paper Range:
105 g/m
2
(28 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 53 mm (2.1 in)
1
500-sheet trays can print on bond paper heavier than 220 g/m
2
(59 lb) in some circumstances, but HP does not guarantee results.
Table 3-
7
500-sheet tray paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted or letterhead Portrait 1-sided printing Face up
Top edge at the back of the tray
Automatic 2-sided printing Face down
Top edge at the back of the tray
44 Chapter 3 Input trays and output bins ENWW