Use easy-access USB printing
This product features easy-access USB printing, so you can quickly print les without sending them from a
computer. The product accepts standard USB ash drives in the USB port on the front of the product. You can
print the following types of les:
●
.pdf
●
.prn
●
.pcl
●
.ps
●
.cht
Before you can use this feature, you must enable the USB port. Use the following procedure to enable the port
from the product control-panel menus:
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Enable Retrieve from USB
3. Select the Enable option, and then touch the Save button.
Print easy-access USB documents
1. Insert the USB ash drive into the USB port on the
left side of the product control panel.
NOTE: You might need to remove the cover
from the USB port. Pull the cover straight out to
remove it.
2. The product detects the USB
ash drive. Touch
the OK button to access the drive, or, if prompted,
select the Retrieve from USB option from the list
of available applications. The Retrieve from USB
screen opens.
3. Select the name of the document that you want
t
o print.
NOTE: The document might be in a folder. Open
folder
s as necessary.
124 Chapter 5 Print ENWW
To Next Page
Loading...
