HP LaserJet Enterprise 700 - Tray 1; Tray capacity and paper orientation

Tray 1
Tray capacity and paper orientation
To prevent jams, do not overll trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 3-2 Tray 1 capacity
Paper type Specications Quantity
Paper Range:
60 g/m
2
(16 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 10 mm (0.39 in)
Equivalent to 100 sheets of 75 g/m
2
(20 lb) bond
Envelopes
Less than 60 g/m
2
(16 lb) bond to 90 g/m
2
(24 lb) bond
Up to 10 envelopes
Labels Maximum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)
Up to 50 sheets
Glossy paper Range:
105 g/m
2
(28 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 10 mm (0.39 in)
Up to 50 sheets
Table 3-
3
Tray 1 paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted, prepunched, or
lett
erhead
Portrait 1-sided printing Face down
Top edge toward the back of the product
Automatic 2-sided printing Face up
Top edge toward the back of the product
34 Chapter 3 Input trays and output bins ENWW