EasyManua.ls Logo

HP LaserJet Enterprise 700 - Install the software

HP LaserJet Enterprise 700
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
d. Find the IP address on the Jetdirect page.
Jetdirect Page
HP Color LaserJet
Page 1
5. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually congure the IP
addr
ess. Otherwise, the network conguration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must manually
congure the IP address.
Install the software
1. Close all programs on the computer.
2. Install the software from the CD.
3. Click the product ic
on, and follow the on-screen instructions.
4. Click the Close
button when the installation is complete.
NOTE: Complete the following steps after completing the printing-system software installation only if
you did no
t add a printer when running the installer.
5. At the computer, open the Apple menu, click the System Preferences menu, and then click the Print
& Fax
icon or the Print & Scan icon.
6. Click the plus symbol (+).
7. Use either Bonjour (default browser) or IP Printing for the network connection.
NOTE: Bonjour is the easiest and best method to use if the product is installed on your local network.
IP Printing must be used if the product is located outside the Bonjour link-local space on a larger
network
.
If you are using Bonjour, complete the following steps:
ENWW Connect the product to a network by using a network cable and install the software (Mac OS X) 23

Table of Contents

Other manuals for HP LaserJet Enterprise 700

Related product manuals