4. Paper could be jammed inside the fuser where it
would not be visible. Grasp the blue handles on
both sides of the fuser, and pull the fuser straight
out of the product.
WARNING! Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they have
cooled.
5. Pull forward on the green tab to open the fuser
jam-
access door. If paper is jammed inside the
fuser, pull the paper straight up to remove it.
240 Chapter 10 Solve problems ENWW
To Next Page
Loading...
