3. Clean the main scanner glass, the document-
feeder glass (the small strip of glass on the left
side of the scanner), and the white foam backing.
Use a soft cloth or sponge that has been
moistened with nonabrasive glass cleaner. Dry
the glass and white plastic backing by using a
chamois or a cellulose sponge to prevent
spotting.
CAUTION: Do not use abrasives, acetone,
benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these
can damage the product. Do not place liquids
directly on the glass or platen. They might seep
and damage the product.
NOTE: If you are having trouble with streaks on
copies when you are using the document feeder,
be sure to clean the small strip of glass on the left
side of the scanner.
NOTE: See this English-language video for a
demonstration of how to identify and clean debris
that causes streaks on copies:
www.youtube.com/watch?v=CGn7FJvH8sE.
4. Connect the power cable to an outlet, and then
press the power button to turn on the product.
ENWW Improve copy quality 261
To Next Page
Loading...
