4. Be careful, the spring and the gears behind the fuser motor assembly are not captive.
CAUTION: Do not lose the spring or gears when you remove the fuser motor assembly.
Figure 1-114 Remove the fuser motor assembly (4 of 4)
Reinstall the fuser motor assembly
Make sure that the fuser motor assembly spring (callout 1) and gear pin (callout 2) are correctly
positioned in the hole and slot provided in the assembly mounting bracket. The assembly mounting
bracket fits flat against the product chassis when the fuser motor assembly is correctly installed.
Figure 1-115 Reinstall the fuser motor assembly
2
1
80 Chapter 1 Removal and replacement ENWW
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...