Cold reset
The traditional cold reset function found in other HP LaserJet products is not supported for this product.
The equivalent function is the Restore Defaults option in the HP ToolboxFX or the Service menu.
A cold reset unlocks menus that have been previously locked and resets all control-panel menu items to
the factory defaults. It does
not
reset the serial number and the page counts.
NOTE: Before restoring defaults, print a menu structure report and a configuration page. Use the
information on these pages to reset customer-specific settings.
CAUTION: All HP Jetdirect settings are also reset. Be sure to print a configuration page before
restoring defaults. Make note of the IP address that is listed on the Jetdirect configuration page. You
might need to restore the IP address after performing a cold reset.
Product updates
Software and firmware updates and installation instructions for this product are available at
www.hp.com/support/LJColorM351 or www.hp.com/support/LJColorM451. Click Support & Drivers,
click the operating system, and then select the download for the product.
176 Chapter 2 Solve problems ENWW
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...