Menu item Sub-menu item Description
Checklist 1-Column
2-Column
Prints pages that have preprinted lines with check boxes
Music Paper Portrait
Landscape
Prints pages that have preprinted lines for writing music
System Setup menu
In the following table, items that have asterisks (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Sub-menu item Description
Language Select the language for the control panel display
messages and the product reports.
Paper Setup Def. Paper Size Letter
A4
Legal
Select the size for printing internal reports or any
print job that does not specify a size.
Def. Paper Type A list of available
paper types
appears.
Select the paper type for printing internal reports
or any print job that does not specify a type.
Tray 1 Paper Type
Paper Size
Select the default size and type for Tray 1 from
the list of available sizes and types.
Tray 2 Paper Type
Paper Size
Select the default size and type for Tray 2 from
the list of available sizes and types.
Paper Out Action Wait Forever*
Cancel
Override
Select how the product should react when a print
job requires a size or type that is not available
or when a specified tray is empty.
Select the Wait Forever option to make the
product wait until you load the correct paper
and press the OK button. This is the default
setting.
Select the Override option to print on a different
size or type after a specified delay.
Select the Cancel option to automatically cancel
the print job after a specified delay.
If you select either the Override or Cancel
options, the control panel prompts you to specify
the number of seconds to delay. Use the arrow
buttons to increase or decrease the time.
ENWW
Tools for troubleshooting
125
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...