HP LaserJet Pro 400 color M451 - Rear cover and feed guide (simplex product)

Rear cover and feed guide (simplex product)
Before proceeding, remove the following components:
●
Rear-door stopper. See
Rear-door stopper and link caps (simplex product) on page 25.
●
Rear door. See
Rear door (simplex product) on page 26.
●
Right cover. See
Right cover on page 21.
Remove the rear cover and feed guide (simplex product)
1. Carefully release the link guide from the pivot pin on the feed guide.
Figure 1-37 Remove the rear cover and feed guide (simplex product) (1 of 6)
30 Chapter 1 Removal and replacement ENWW
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com