6. Remove the right cover.
Figure 1-23 Remove the right cover (5 of 5)
Reinstall the right cover
NOTE: Do not reinstall the DIMM cover before reinstalling the right cover. The cover will interfere with
the product chassis and prevent the correct installation of the right cover.
●
Before you reinstall the right cover, take note of the mounting tab locations on the back of the
cover.
Figure 1-24 Reinstall the right cover
ENWW
Removal and replacement procedures
23
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...