4. Before you proceed, take note of location of the top cover tabs.
Figure 1-56 Remove the upper-cover assembly (3 of 4)
5. Carefully rotate the back side of the top cover up and off of the product to release the tabs, and
then remove the cover.
NOTE: When you reinstall the upper cover, ensure that all the mounting tabs are correctly
seated. See
Reinstall the upper cover on page 43.
Figure 1-57 Remove the upper-cover assembly (4 of 4)
42 Chapter 1 Removal and replacement ENWW
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com
To Next Page
Loading...