HP LaserJet Pro 400 color M451 - Page 83

4. Remove two screws (callout 1) and separate the door bushing (callout 2) from the chassis.
Figure 1-83 Remove the front-door assembly (4 of 10)
1
2
5. Release the bushing from the door-retainer link (callout 1).
Figure 1-84 Remove the front-door assembly (5 of 10)
1
ENWW
Removal and replacement procedures
59
For mor information on LaserJet Pro 300, Pro 400 go to www.printersupplies.com