Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
ProCurve# show sflow 2 sampling-polling A1-A4
Number denotes the sampling/polling instance to which the receiver is coupled.
Port | Sampling Dropped
+
---
| Polling
| Enabled Rate Header Samples | Enabled Interval
----- + -------- -------- ------ ---------- ------- --------
A1 Yes(2) 40 128 1234567890 -- -
A2 --- --- --- 0 Yes(1) 60
A3 No(1) 0 100 898703 No 30
A4 Yes(3) 50 128 0 No(3) 0
Figure 14-15. Example of Viewing sFlow Sampling and Polling Information
Note The sampling and polling instances (noted in parentheses) coupled to a
specific receiver instance are assigned dynamically, and so the instance
numbers may not always match. The key thing to note is whether sampling or
polling is enabled on a port, and the sampling rates or polling intervals for the
receiver instance configured on each port.
14-32
To Next Page
Loading...
