HP ProLiant DL580 Generation 2 User Manual

Troubleshooting
c. Copyright information
d. Processor initialization
e. Multi-initiator configuration
IMPORTANT: Select the multi-initiator configuration utility (ctrl-a) only to support HP storage and
clustering options.
f. PXE initialization
g. Option ROMs
h. SCSI devices
10. The operating system loads to complete the boot process.
If the server completes POST and attempts to load the operating system, go to the “Problems
After Initial Boot” section in this chapte r.
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 5-3

HP ProLiant DL580 Generation 2 Specifications

General

Processor Socket	Socket 604
Storage Controller	Integrated Smart Array 6i Controller
Storage	SAS
Network	Integrated Dual Gigabit NICs
RAID Support	RAID 0, 1, 5
Expansion Slots	6 PCI-X slots
Power Supply	Redundant Power Supplies
Form Factor	4U Rack
Management	HP Integrated Lights-Out (iLO)
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 4 processors)
Drive Bays	Up to 6 hot-plug SCSI or SAS drives