HP ProLiant DL580 Generation 2 - Removing a DIMM

Removal and Replacement Procedures
Removing a DIMM
To remove a DIMM:
1. Remove the memory board. Refer to “Rem oving a Memory Board” in this ch apter.
2. Place the memory board on a level, nonconductive surface.
3. Open the DIMM slot latches (1).
4. Remove the DIMM from the DIMM slot (2).
Figure 2-17: Removing a DIMM
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 2-25