HP ProLiant DL580 Generation 2 - Returning the Server Back into the Rack

Removal and Replacement Procedures
WARNING: Be careful when pressing the rail-release levers and sliding the component
into or out of the rack. The sliding rails could pinch your fingertips.
3. To return the server to the rack, reach around the front of the server to press the
rail-release levers at the front of both server rails and continue to slide the server into the
rack.
Figure 2-4: Returning the server back into the rack
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 2-7