EasyManuals Logo

HP ProLiant DL580 Generation 2 User Manual

HP ProLiant DL580 Generation 2
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Removal and Replacement Procedures
3. Install the required DIMMs based on your desired memory configuration. Be sure to
follow all DIMM installation requirements. Refer to “DIMM Installation Requir ements”
in this chapter for the desired memory configuration.
4. Install the memory board. Refer to “Ins talling a Memory Board” in this chapter.
5. Configure the DIMMs:
a. Power on the server.
b. Press the F9 key to enter RBSU.
c. Select Advanced Options.
d. Change POST Speed Up to disable (to test the replaced memory).
e. Press any key to return to the RBSU main menu.
f. Select System Options.
g. Select Advanced Memory Protection.
h. Select the desired memory mode.
i. Press the Esc key twice to go back to the main RBSU menu.
j. Press the F10 key to exit RBSU. The server reboots and tests all memory in the
system.
k. Once the memory has been tested, re-enable POST Speed Up for faster system boot,
if desired.
IMPORTANT: To reconfigure the memory mode after initial setup, you must reboot the system
and enter RBSU.
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 2-29

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant DL580 Generation 2 and is the answer not in the manual?

HP ProLiant DL580 Generation 2 Specifications

General IconGeneral
Processor SocketSocket 604
Storage ControllerIntegrated Smart Array 6i Controller
StorageSAS
NetworkIntegrated Dual Gigabit NICs
RAID SupportRAID 0, 1, 5
Expansion Slots6 PCI-X slots
Power SupplyRedundant Power Supplies
Form Factor4U Rack
ManagementHP Integrated Lights-Out (iLO)
Operating System SupportWindows Server, Linux
ProcessorIntel Xeon (up to 4 processors)
Drive BaysUp to 6 hot-plug SCSI or SAS drives

Related product manuals