Diagnostic Tools
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 3-3
Table 3-1: Diagnostic Tools
Tool Description How to run the tool
Survey Utility Survey Utility gathers critical
hardware and software information
on servers running Microsoft
Windows NT, Novell NetWare, SCO
OpenServer, or SCO Unixware
operating systems.
If a significant change occurs
betwe
en dat
a-gathering intervals,
the survey utility marks the previous
information and overwrites the
survey text files to reflect the latest
changes in the configuration.
Install the Survey Utility from the
SmartStart CD, the Integration
Mainte
nanc
e Utility, or the
Management CD.
Integrated Management Log (IML) The IML is a log of system events
such as system failures or nonfatal
error conditions. View events in the
IML from within:
• Insight Manager 7
• Survey Utility
• Operating system-specific IML
utilities
The IML requires HP operating
system management drivers. Refer
to the SmartStart CD for instructions
on installing the appropriate drivers.
ROM-Based Setup Utility (RBSU)) RBSU configures the hardware
installed in or connected to the
server. Specifically, it can:
• Store configuration information
in nonvolatile memory
• Manage memory installation,
processor upgrades, network
interface cards and mass
storage devices
• Assist in installing an operating
system
• Configure ports and IRQs, if
required
Run RBSU by pressing the F9 key
during POST.
ROMPaq Utility The ROMPaq Utility checks the
system and provides a choice of
available ROM revisions and
controller firmware.
Run this utility from the SmartStart
CD incl
ude
d with the server.
SmartStart Diskette Builder The SmartStart Diskette Builder is a
utility that uses data stored on the
SmartStart CD to create support
diskettes. You can create support
diskettes for specific configuration
needs or for software that cannot be
used directly from the
SmartStart CD.
Run the diskette builder tool from the
SmartStart CD.
To Next Page
Loading...
