hpmont MONT20 User Manual

Chapter 5 Function Introduction
28 MONT20 User Manual V1.6
5.2.5 F04: CD Curve Parameters
Refer to 6.2.5 Distance Control CD Running, on page 47 for details.
Ref. Code Function Description Setting Range [Default]
F04.00
CD start distance/CD start time
0 - 9999 [0]
At distance control: Start distance (unit: pulse number).
At speed control: Start time (unit: ms).
F04.01
CD start speed
0.00 - 15.00 [4.00Hz]
F04.02 CD Acc. time 0.1 - 99.9 [1.4s]
Define the Acc. time from zero frequency to Max. frequency during CD process.
F04.03 CD speed 0.00 - F00.07 [18.00Hz]
Define the high running speed (frequency) during CD process.
F04.04 CD Dec. point position 50.0 - 90.0 (door width) [62.0%]
When pulse number ≥ (1 - F04.04) × door width, door motor will decelerate from F04.03 (CD speed) to F04.06
(creeping speed at CD ending).
•
The bigger F04.04 is set, the shorter F04.04 is to complete door close.
F04.05 CD Dec. time 0.1 - 99.9 [1.3s]
Defines the Dec. time from Max. frequency to zero frequency.
F04.06 Creeping speed at CD ending 0.00 - 15.00 [3.00Hz]
Define the low creeping speed (frequency) of door motor during CD process.
F04.07 Door vane acting position at CD ending/running time at CD ending
creeping speed
1 - 5000 [0]
Distance control: Starting distacnce (unit: pulse number).
• When pulse number ≤ F04.07, the related process of executing CD ending door vane action.
Speed control: Running time at CD ending creeping speed (unit: ms).
F04.08 Door vane action speed at CD ending 0.00 - 15.00 [0.00Hz]
Define the door motor running speed (frequency) of door vane action position within range of F04.07 during
CD process.
F04.09 CD limit point position 1 - 500 [60]
When the door position is within the CD limit point, door motor will output fully close signal of door.
F04.10 CD ending speed of Asyn. 0.00 - 5.00 [0.00Hz]
F04.11 CD ending range of Asyn. door vane CD/running time of CD ending
Asyn. door vane action speed
0 - 5000 [0]
Distance control: Starting distance (unit: pulse number).
• When pulse number ≤ F04.11 setting pulse number, CD ending door vane action will be processed.
Speed control: Running time of CD ending Asyn. door vane action speed (unit: ms).

hpmont MONT20 Specifications

General

Brand	hpmont
Model	MONT20
Category	Controller
Language	English