EasyManuals Logo

Huawei FusionModule800 Installation Guide

Huawei FusionModule800
298 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Copyright © Huawei Technologies Co., Ltd.
264
After the first login, change the password in time to ensure account security and prevent unauthorized
network attacks, such as data tampering. Huawei will not be liable for any security issues caused by your
failure to change the preset password in time or password loss after changing.
Step 2 Add a camera. For details, see the documentation delivered with the equipment or obtain the
documentation by referring to the "Preparing Documentation" section. View the
corresponding section.
The IPC6325 camera is driven by the HWSDK protocol.
1. In the Quick Setup area on the VCN IVS home page, double-click Add Camera.
2. Click + in the lower left corner on the Search criteria page, setting the parameters
according to the following table, and click Next.
Table 6-18 Setting search criteria
Item
Value
Start IP Address and End IP Address
IP address range
Drive
HWSDK
Access domain
Select the domain that cameras need to
access
Mount Server
Select the server that cameras need to access
There are multiple VCNs for multiple smart modules, you are advised to evenly distribute the cameras to
each VCN.
3. Click Search, in each camera record, enter the user name and password in the text boxes
and click Verify. If the camera is verified successfully, select cameras to add and click
Next.
4. Preview live video images, click the camera in the camera list on the left, and adjust
camera parameters to optimize the image effect. Then click Next.
5. (Optional) Group the cameras and click Next after grouping.
6. Click Finish to finish adding a camera.
Step 3 Configuring a Video Recording Plan.
1. In the Quick Setup area on the VCN IVS home page, double-click Server Recording
Plan.
2. Select the camera on the Cameras list and click Next.
3. (Optional) Set recording parameters, and click Next.
4. Set recording plan parameters in the Time settings. Drag the timeline to select the time
segment for implementing video recording.
If you set the recording plan policy is to All, you do not need to set the recording plan time.

Table of Contents

Other manuals for Huawei FusionModule800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionModule800 and is the answer not in the manual?

Huawei FusionModule800 Specifications

General IconGeneral
BrandHuawei
ModelFusionModule800
CategoryStorage
LanguageEnglish

Related product manuals