Huawei iManager NetEco 6000 User Manual

iManager NetEco 6000
Device Installation and Commissioning Guide
6 Adding Devices
Issue 03 (2019-03-10)
Copyright © Huawei Technologies Co., Ltd.
132
Procedure
Step 1 Choose System > System Settings > Set Notified Server from the main menu. The Set
Notified Server window is displayed.
Step 2 In the navigation tree on the left, choose SMS Modem.
Step 3 Set interworking parameters of the SMS modem. For details, see Figure 6-5.
Figure 6-5 Setting interworking parameters of the SMS modem
Table 6-6 Parameters of the SMS modem
Parameter
Description
Network system of
SMS modem
RAT of the SMS modem: GSM.
SMS modem serial
port
Serial port for connecting the SMS modem on the server.
COM1 or COM2.
SMS modem
bound rate
SMS modem bound rate provided in the SMS modem user manual.
115200, 9600 or 4800.
Mobile number for
receiving
notification
Phone number to which the short messages are sent.
NOTE
Mobile number for receiving notification must be set according to the
following requirements:
1.
A country code must be added preceding the calling number. For example,
if the subscriber is located in China, the entered calling number is in the
following format: 86 + Calling number.
2.
If short messages are successfully sent but the subscriber does not receive
the short messages, you need to remove the country code.
Step 4 Click Apply to save the settings.

Click Test to check the connection between the NetEco and the SMS modem.

Click Reset to reset interworking parameters of the SMS modem.
----End

Huawei iManager NetEco 6000 Specifications

General

Brand	Huawei
Model	iManager NetEco 6000
Category	Server
Language	English