iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 6-26 Security setting – trusted stand region
2. Enable the following options and then click Ok.
− Initialize and script ActiveX controls not marked as safe
− Script ActiveX controls marked safe for scripting
− Download signed ActiveX controls
− Download unsigned ActiveX controls
3. A dialog box is displayed, indicating Does the determination need to change the
establishment of this region?. Click Yes.
Step 5 Register with the OCX plug-in.
Restart Internet Explorer and enter the IP address to be accessed by the client. The page for
watching videos is displayed. Click Install according to the prompt message. After the OCX
plug-in is installed, you can watch the videos. If videos are not displayed, contact Huawei
technical support.
If it is the first time to install the plug, you need to wait about 10 to 20 seconds.
Step 6 If the OCX plug-in needs to be registered on the client again, perform the following
operations to uninstall the OCX plug-in and then re-install it:
1. Close Internet Explorer.
To Next Page
Loading...
Need help?
General