iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 6-29 Setting SNMP parameters
5. Click Add in SNMP, as shown in Figure 6-30.
Figure 6-30 Setting SNMP parameters_02
6. Input the User Name, MD5 password, and DES password, set Permission to Write,
and click Add.
Record the User Name, MD5 password, and DES password for using when creating a
UPS2000-G on the NetEco.
You are advised to set MD5 Password and DES Password to different values.
Figure 6-31 Setting SNMP parameters_03
7. Click Add in SNMP Trap and Permission Settings.
To Next Page
Loading...
