iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
This operation is performed on the Windows 7 OS. If other OSs are used, perform this operation based
on actual conditions.
Step 3 Specify User Name, Password and Verify Code and click Log In. Figure 6-43 shows the
login dialog box.
Figure 6-43 Login dialog box of the ECC500 V6 collector
If you log in to the ECC500 V6 collector for the first time, enter admin as the user name and 000001 or
Changeme as the password. After you log in to the ECC500 V6 collector successfully, change the
password for security. For details, see 8.5 How to Change the Preset Password for the ECC500
Collector.
Step 4 Choose System Settings > IP Address Settings, set the IP address, subnet mask and default
gateway for the ECC500 V6 collector based on the assigned parameters for the ECC500 V6
collector, as shown in Figure 6-44.
Figure 6-44 Setting ECC500 V6 collector IP address
Step 5 Click Submit.
To Next Page
Loading...
Need help?
General