iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 6-59 Property Panel
Step 4 Type the name for the icon and click Setting. The Setting Rule dialog box is displayed.
1. In the Setting Rule dialog box, configure the real-time value. The value consistent with
real-time signal value.
2. Click OK.
Figure 6-60 Setting Rule
Step 5 In the Basic Properties pane in the Property Panel dialog box, click ... following the
Attributeto configure data for the door status sensor icon.
Step 6 On the displayed Select Data page, select Managed Object and Attribute. Then, click OK.
To Next Page
Loading...
