iManager NetEco 6000
Device Installation and Commissioning Guide
Copyright © Huawei Technologies Co., Ltd.
After the managed object and counter are bound, you can remotely open and close a door using the door
status sensor icon.
1.
Click the door status sensor icon and choose Close or Open under .
2.
In the displayed dialog box, click Yes.
Step 7 Click ... following the Current Alarm. Select alarms to be bound to the icon.
Figure 6-61 Binding alarms
Step 8 Click Yes.
You can bind a maximum of 20 alarms to a measurement object. After an alarm is bound with a device
icon, the color of the device icon will be changed to that of the color indicating that the bound alarm is
generated.
Step 9 In the Property Panel, click Extend Properties then configure basic properties for the icon.
To Next Page
Loading...
Need help?
General