Context
Up to 1001 latest fault alarms and recovery alarms, and 901 event alarms can be saved in the
system. If the record table is full, and a new alarm or event is generated, the new alarm or event
overwrites the oldest record in the record table. You can query the records that have been
overwritten in the NMS database.
The CLI provides multiple ways to query history alarms and events.
Table 1-47 lists the commands for querying history alarms.
Table 1-47 Commands for querying history alarms
To... Run the Command...
Query alarms by alarm
SN
display alarm history alarmsn sn [ detail | list ]
Query alarms by alarm
ID
display alarm history alarmid id [ detail | list | start-number
number]
Query alarms by alarm
type
display alarm history alarmtype type [ detail | list | start-
number number]
Query alarms by alarm
class
display alarm history alarmclass class [ detail | list | start-
number number]
Query alarms by alarm
level
display alarm history alarmlevel level [ detail | list | start-
number number]
Query alarms by alarm
time
display alarm history alarmtime start start-date start-time end
end-date end-time [ start-number number ] [ detail | list | start-
number number]
Query alarms by alarm
parameter
display alarm history alarmparameter { frameid/slotid/portid |
frameid/slotid | frameid | vlanif vlanif } [ detail | list ]
Query all the latest
alarms
display alarm history all [ detail | list ]
Table 1-48 lists the commands for querying history events.
Table 1-48 Commands for querying history events
To... Run the Command...
Query events by event
SN
display event history eventsn sn [ detail | list ]
Query events by event
ID
display event history eventid id [ detail | list | start-number
number]
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
188
To Next Page
Loading...
Need help?
General
