Parameter Code Parameter Name Description
52 Acct-Input-Gigawords Indicates the number of upstream
bytes in the unit of 4Gbyte,
kbyte, Mbyte, or Gbyte. The
specific unit can be configured
using commands.
53 Acct-Output-Gigawords Indicates the number of
downstream bytes in the unit of
4Gbyte, kbyte, Mbyte, or Gbyte.
The specific unit can be
configured using commands.
55 Event-Timestamp Indicates the user online time in
the unit of second. The value is
the absolute number of seconds
counting from 1970-01-01
00:00:00.
60 CHAP-Challenge Indicates the challenge field for
CHAP authentication. This
parameter is valid only for
CHAP authentication.
61 NAS-Port-Type Indicates the NAS port type.
79 EAP-Message Carries EAP packets.
80 Message-Authenticator Verifies validity of packets
between the RADIUS server and
RADIUS client to prevent
malicious attacks.
85 Acct-Interim-Interval Indicates the interval for real-
time charging in the unit of
second.
87 NAS-Port-Id Indicates the user access port
number. The format of this
parameter uses the format when
DHCP option 82 is in common
raio mode.
88 Framed-Pool Indicates the name and address
segment number of the address
pool. After being delivered by
the RADIUS server, this
parameter is filled to suboption 7
in user DHCP packets by the
MA5600T/MA5603T/
MA5608T.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 2 Basic Configurations
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
233
To Next Page
Loading...
Need help?
General
