Parameter Code Parameter Name Description
42 Acct-Input-Octets Indicates the number of upstream
bytes in the unit of byte, kbyte,
Mbyte, or Gbyte. The specific
unit can be configured using
commands.
43 Acct-Output-Octets Indicates the number of
downstream bytes in the unit of
byte, kbyte, Mbyte, or Gbyte.
The specific unit can be
configured using commands.
44 Acct-Session-Id Indicates the charging
connection number. The
connection numbers for the
charging start packet, real-time
charging packet, and charging
stop packet of the same
connection must be the same.
45 Acct-Authentic Indicates the user authentication
mode.
l 1: RADIUS authentication
l 2: local authentication
46 Acct-Session-Time Indicates the time for a user to go
online in the unit of second.
47 Acct-Input-Packets Indicates the number of upstream
packets.
48 Acct-Output-Packets Indicates the number of
downstream packets.
49 Terminate-Cause Indicates the user connection
interruption cause. The valid
values are as follows:
l User-Request(1): The user
actively goes offline.
l Lost Carrier(2): The
handshake fails, such as the
EAPOL detection fails.
l User Error(17): The user
authentication fails or times
out.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 2 Basic Configurations
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
232
To Next Page
Loading...
Need help?
General
