huawei(config)#interface giu 0/19
huawei(config-if-giu-0/19)#native-vlan 0 vlan 100
huawei(config-if-giu-0/19)#native-vlan 1 vlan 100
huawei(config-if-giu-0/19)#native-vlan 2 vlan 100huawei(config-if-giu-0/19)
#quit
l Create the traffic profile.
huawei(config)#traffic table ip index 8 cir off priority 5 priority-policy
local-Setting
l Add ADSL2+ port 2 and 3 to VLAN 100.
huawei(config)#service-port 100 vlan 100 adsl 0/2/2 vpi 0 vci 35 rx-cttr 8
tx-cttr 8
huawei(config)#service-port 101 vlan 100 adsl 0/2/3 vpi 0 vci 35 rx-cttr 8
tx-cttr 8
3. Configure the multicast service.
l Enable the multicast proxy.
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp mode proxy
Are you sure to change IGMP mode?(y/n)[n]:y
l Add the upstream port.
huawei(config-mvlan100)#igmp default uplink-port 0/20/0
huawei(config-mvlan100)#igmp uplink-port 0/20/0
huawei(config-mvlan100)#quit
huawei(config)#btv
huawei(config-btv)#igmp uplink-port-mode mstp
Are you sure to change the uplink port mode?(y/n)[n]:y
l Configure the preview parameters.
In this example, set the preview authority profile 1 with the preview duration for the
program to 150s, the number of preview attempts to 6 each day, and the preview
interval to 60s.
huawei(config-btv)#igmp preview-profile add index 1 duration 150 times 6
interval 60
huawei(config-btv)#igmp preview auto-reset-time 00:00:00
l Configure the program library.
huawei(config-btv)#quit
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp program add name program1 ip 224.1.1.1
sourceip 10.10.10.10
huawei(config-mvlan100)#igmp program add name program2 ip 224.1.1.2
sourceip 10.10.10.10
huawei(config-mvlan100)#igmp program add name program3 ip 224.1.1.3
sourceip 10.10.10.10 preview-profile 1
l Configure the authority profile.
huawei(config-mvlan100)#quit
huawei(config)#btv
huawei(config-btv)#igmp profile profile-name profile0 program-name program1
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program2
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program3
preview
l Configure the multicast user.
huawei(config-btv)#igmp policy service-port 100 normal
huawei(config-btv)#igmp policy service-port 101 normal
huawei(config-btv)#igmp user add port 0/2/3 adsl 0 35 no-auth
huawei(config-btv)#igmp user add port 0/2/2 adsl 0 35 auth
huawei(config-btv)#igmp user bind-profile port 0/2/2 profile-name profile0
huawei(config-btv)#quit
huawei(config)#multicast-vlan 100
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
454
To Next Page
Loading...
Need help?
General
