Figure 1-29 Interface of converting the client public key to the RSA public key
Step 8 Generate the public key for the SSH user.
Create RSA public key. Copy the RSA public key to the server in the config-rsa-key-code
command line mode.
huawei(config)#rsa peer-public-key key
Enter "RSA public key" view, return system view with "peer-public-key end".
NOTE: The number of the bits of public key must be between 769 and 2048.
huawei(config-rsa-public-key)#public-key-code begin
Enter "RSA key code" view, return last view with "public-key-code end".
huawei(config-rsa-key-code)#30818702 81810098 933744B6 7C864EC7 A86A84CC 198BAC1
5
huawei(config-rsa-key-code)#D32834F7 365CFD17 E7FE4041 3266E416 710D13ED 22BD4D5
9
huawei(config-rsa-key-code)#DF0C3E46 A995CC61 DC4CB179 F6888B8C 3F8A3085 51EDB5C
7
huawei(config-rsa-key-code)#5DEBDBE1 3AB4A256 0D0B9AA8 9A419D85 35C0E562 AE0BBFA
B
huawei(config-rsa-key-code)#515299F9 D2803E84 3AE36C20 949367EA 0697EB20 2594A77
4
huawei(config-rsa-key-code)#9A0EFF04 26928874 FF9124C4 D28F0702 0125
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46
To Next Page
Loading...
Need help?
General
