105
17.2 Disassembly and final decommissioning
Disassembly and final decommissioning must be carried out by a qualified waste disposal
company. During disassembly, pay attention to the oil contained in the hydraulic components.
For disassembly questions, please contact our after-sales service.
DANGER!
The lid of the machine is equipped with gas struts.
• Open and secure the lid with a suitable hoist when disassembling!
• Carefully remove the gas struts!
ENVIRONMENTAL PROTECTION NOTICE!
The hydraulic components installed on the machine contain oil that must not get
into the groundwater or floor drains.
• Collect escaping hydraulic oil!
• Dispose of the hydraulic oil in an environmentally friendly manner and
according to local regulations!
DANGER!
The disposal of the machine must be carried out by an authorized specialist
company with the appropriate knowledge. When disposing of the machine, the
applicable laws and regulations must be observed.
To Next Page
Loading...