41
9.2 Installation
Establish electrical connection and check direction of rotation (see chapters 9 and 9.1).
Before commissioning, check whether
• there are objects in the compaction chamber that should not be there
• there are other accessories, spare parts or other objects in the container
• visible damage has been caused to the equipment or controls by the transport
• the container door is properly closed and locked
DANGER!
The machine may only be operated by one person at a time. This person must ensure
that no other person is in the danger zone, as well as in the immediate vicinity of the
machine.
ATTENTION!
Fuses may only be replaced by identical fuses. Never use larger fuses!
DANGER!
Only trained and instructed specialized staff is allowed to work on the machine.
Persons assigned to work on the machine must have read and understood the ope-
rating instructions and, in particular, the safety instructions, and be in appropriate
mental and physical condition.
Failure to follow these instructions can result in danger to life and limb and / or dam-
age to the system or other property.
DANGER!
Prior to commissioning make sure that the delivered machine and the whole area
around it comply with the valid safety requirements.
NOTE!
Before each start-up, the machine must be checked by the operator for proper condi-
tion.
To Next Page
Loading...