37
9 Initial start-up
ATTENTION!
Pay attention to the correct rotating field during the first commissioning, location or
cable change. By default, the machine is delivered with a clockwise rotating field.
If the rotating field in the supply line does not meet this requirement (the ram does
not move even though the hydraulic motor is running), it must be reconnected by an
authorized electrician. Failure to comply with the prescribed direction of rotation of
the electric motor may result in damage to the unit.
DANGER!
If the mains plug is not disconnected, the supply line of the machine is still live up to
the main switch!
•
When working on the supply line, the mains plug must be pulled out!
ATTENTION!
TRIPPING HAZARD
Make sure that there are no loose cables or objects on the floor in the machine area.
DANGER!
The system may only be operated by one person at a time. This person must ensure
that no other person is in the danger zone as well as in the immediate vicinity of the
plant.
ATTENTION!
Fuses may only be replaced by identical fuses. Never use larger fuses!
To Next Page
Loading...