13
4.4 Warning and information signs
The warning and information labels attached to the machine must be observed. They must not
be changed or removed. Keep the warning and information signs legible.
When applying foils and other stickers, the following must be observed:
The substrates must be degassing-free and hardened. Outgassing or uncured surfaces can
cause damage. Signs that are no longer recognizable or damaged must be replaced immediate-
ly.
The following warning and information signs are attached to the machine depending on the
type:
Explanation note of the warning labels:
DANGER!
Reaching into the
feeding hopper or
chute or climbing
into it is forbidden!
Danger to life!
No access for unautho-
rized persons!
Stay for unauthorized
persons is not permitted.
Can lead to bruises and
even death!
DANGER!
When opening the
door, do not stay in the
danger area!
To Next Page
Loading...