89
15.3 Maintenance in the cylinder chamber
Before starting work:
(1) Open the marked screws with a triangular
spanner.
(2) Lock at least one locking latch so that the
inspection hatch cannot close itself completely in
windy conditions.
(3) cylinder chamber: cylinder is extended;
Deposits have to be removed with broom and
shovel (once a week).
ATTENTION!
•
Move the ram to the front position before cleaning the cylinder chamber and
stop the machine (compaction chamber closed)
DANGER before working on the machine:
•
Bring main switch to "OFF" position!
•
Secure main switch against restart! (use personal padlock)
•
Pull out the mains plug!
•
Attach a suitable safety note to prevent the machine from
being restarted!
To Next Page
Loading...