65
Opening
• Pull the cotter pin in front of the ratchet out of the bracket on the side hinged door or
loosen the retaining plate.
• Bring the ratchet to position "loosen" by moving the pin on the ratchet.
• Make sure that no persons are in the danger zone.
• Loosen the door locking with the lever of the ratchet until the side hinged door is kept
by the door catch hook.
• The door catch can now be released with the ratchet until the side hinged door is fully
open.
• Secure the side hinged door via the door arrest against unintentional closing.
Closing
• Loosen the door holder and close the side hinged door until the door catch can be
locked.
• Make sure that no persons are in the danger zone.
• Use the ratchet to lock the door over the "close" position via the door catch.
• Fully lock the side hinged door with the ratchet.
•
Secure the ratchet with the cotter pin or the retaining plate and bring the ratchet into
"
neutral
"
position.
To Next Page
Loading...