Hyd-Mech DM8 - Page 11

Version 24DM
Introduction and technical specifications 1--5
The machine is supplied with a 2/4 pole three phase motor giving 2 band saw
speeds:
-- 1ª speed (4 poles) = 36 mt/min (11.21 ft./min)
-- 2ª speed (2 poles)= 72 mt/min (22.43 ft./min);
The OPTIONAL 4/8 pole motor gives speeds of 36/18 mt./min. (11.21 / 5.61
ft./min).
Warning