Getting to Know Your WeatherTRAK ET plus
Chapter 1: Getting to Know Your
WeatherTRAK ET plus
In this chapter you will learn about:
• Overview of the Controller and
• Selecting and Adjusting the Settings.
Note: Before using your controller
1. Make sure to inspect your existing irrigation system for any leaks
or broken pipes. The efficiency of your new controller depends
on the condition of your system. By having an efficient system,
you will gain the most from using WeatherTRAK ET plus.
2. Install your new controller. HydroPoint recommends that you
have WeatherTRAK ET plus installed and programmed by an
authorized WeatherTRAK ACE contractor. For more information,
call HydroPoint at: (800) 362-8774.
HydroPoint has provided a mounting template and separate poster
with step-by-step instructions for installing WeatherTRAK ET plus.
Chapter 1
1
5
To Next Page
Loading...