HydroPoint WeaterTRAK ET plus - Using Display Adjust

4. Turn the Upper Line knob until you see:
Custom Plant Types (Kc)
Kc is a mathematical notation for “Landscape Coefficient.” This
is an adjustment factor for each station based on the plant type
that is being irrigated. For example, native plants use less water
than most non-native plants and will have a lower Kc.
To enter the custom turf Kc for each month, turn the Upper Line
knob until you see the above display. Then turn the Lower Line
knob to set Kc for January. Next turn the Upper and Lower Line
knobs to set Kc for February. Repeat this process for all the
remaining months of the year.
Using Display Adjust
Display Adjust lets you adjust the contrast of the display.
1. Turn the Function Selector knob to DISPLAY ADJUST.
The display will look like this:
2. Turn the Upper Line knob left or right to change the contrast to
the most desirable setting.
ADJUST CONTRAST
Use Upper Line to Change
SET KC CUSTOM TURF JAN
1.00
SET KC CUSTOM PLANT B
1.00
SET KC CUSTOM PLANT A
1.00
Using Special Features74