Getting to Know Your WeatherTRAK ET plus 9
ET
This setting displays:
• The last ET value received along with the time and date it
was received,
• The weekly ET value, which is an accumulation of the ET
values sent over the last seven days and
• An optional feature that allows you to set custom plant and
turf types and associated water requirements.
Manual
This feature lets you manually operate one, multiple, or all
stations for a specific period of time, in increments of 1 minute,
from 1 to 99 minutes.
6. Information Display
This three-line display shows the status of your controller and
the adjustments that you make to it.
Selecting and Adjusting the Settings
You can select and adjust the controller’s settings in three simple
steps.
1. Turn the Function Selector knob to one of the following settings.
Going clockwise they are:
• Run,
• Setup,
• Schedule,
• Program,
• Copy,
• Review,
• Adjust,
• Rain Pause,
• Off,
• Display Adjust,
• Help,
• Alerts,
• ET and
• Manual.
You will see the display change as you turn the knob.
To Next Page
Loading...