Viewing the Serial Number
Under SETUP, to view the serial number of your controller, turn the
Upper Line knob until you see:
Please write down your serial number for future reference.
SN #:___________________________
Viewing the Phase Integrity
To view the phase integrity, which indicates wireless reception
strength, turn the Upper Line knob until you see:
Note: Before calling HydroPoint Data Systems to activate your
controller you should leave the phase integrity screen on for several
minutes to acquire the correct phase integrities for the controller. Call
HydroPoint Customer Service at: (800) 362-8774.
Locking on a Phase
To activate your controller, you will be asked to lock to a phase. Do
not perform this setting until the HydroPoint Customer Service
Representative asks you to do it.
To do this:
1. Turn the Upper Line knob until you see:
To Next Page
Loading...