Adjust (Auto Mode Only)
The ADJUST feature allows you to easily adjust (increase or
decrease) the watering times per station in 5% increments. Adjust
should be used for fine-tuning each station according to its specific
watering needs.
How to adjust:
1. Turn the Function Selector knob to ADJUST.
2. Using the Upper Line knob, select the station to adjust.
3. Using the Lower Line knob, select the amount to adjust the
station.
Manual
The MANUAL feature allows you to immediately start irrigation for
a specified number of minutes for all stations or a single station(s).
Only one station can be on at a time when watering in MANUAL.
To water all stations:
1. Turn the Function Selector knob to MANUAL.
2. Using the Lower Line knob, select “Manual Water All.”
3. Rotate the Upper Line knob to the right one notch.
4. Using the Lower Line knob, select the number of minutes to
operate.
To water selected stations:
1. Turn the Function Selector knob to MANUAL.
2. Using the Lower Line knob, select “Specific Stations.”
3. Rotate the Upper Line knob to the right until the desired station
is selected.
4. Using the Lower Line knob, select the number of minutes to
operate.
Quick Reference Guide86
To Next Page
Loading...