Displaying the WT Version
This information will be used for ET Everywhere service activation only.
To view this, turn the Upper Line knob until you see:
The number you see is the current WeatherTRAK ET plus version.
Setting the Stacking Option
Stacking is an irrigation term for sequential versus simultaneous
operation of two or more schedules.
Your controller has two schedules: A and B.
Stacking (Stacking = yes, the default setting) means that all
stations on both schedule A and schedule B will run sequentially (one
at a time) until all programmed stations have completed their cycle
runtime. Non-stacking (Stacking = no) means that the stations in
program A can operate at the same time as the stations in program B
(simultaneous operation). The hydraulics of your irrigation system
determine whether or not non-stacking should be set.
1. Turn the Upper Line knob until you see:
2. Turn the Lower Line knob to select:
• Yes (Default Setting) or
• No.
To Next Page
Loading...