Setting the Radio Antenna
There are two options for setting the radio antenna:
• Internal (Default Setting) and
• External.
Usually, you will use the internal antenna.
In some areas, the internal antenna may not function due to local
topography or interference from metal items, such as mounting the
controller inside a steel cabinet. You can install an external antenna to
allow the controller to receive a better signal.
To set the antenna:
1. Turn the Upper Line knob until you see:
2. Turn the Lower Line knob to select “Internal” or “External.”
Turn the Upper Line knob until you see:
You can purchase a kit that has the connection cable and antenna.
Please call your local distributor or HydroPoint Sales for more
information.
To Next Page
Loading...